- 185 INR
- On application of diluted solution, Acrylic Sealer dries to form a protective film on the surface. The coupling agents present in the product prevents peeling off effect and makes the application long lasting. Moreover the film is reinforced with nanometer sized particles, which improves abrasion resistance.
- Emulsion of premium acrylic resins
- Viscous Milky Liquid
- ACRYLIC SEALER can be applied on variety of surfaces for protection as well as improving the gloss and water resistance. It is used as water proof membrane, protection of surface, high gloss finish and premium base for paints.
- Glossy, UV & Abrasive Resistant Lon LastingCoating
CETEX AS ACRYLIC SEALER is a premium product that can be applied on variety of surfaces for protection as well as improving the gloss and water resistance. It is concentrated water based emulsion of thermo plastic resin. It is diluted with water and applied by brush or spray. Itis eco-friendly. It is used as water proof membrane, protection of surface,high gloss finish and premium base for paints.
On application of diluted solution, it dries to form a protective film on the surface. The coupling agents present in the product prevents peeling off effect and makes the application long lasting. Moreover the film is reinforced with nano meter sized particles, which improves abrasion resistance.
- It is concentrated product. It has to be diluted with water at site before use.
- Can be applied of various surfaces like concrete, stones, wood, metal, etc.
- It gives a long lasting glossy, wet look finish on the surface. It is UV resistant, and will not discolour.
- Pigment can be added to diluted solution for paint application on various surfaces.
- It has very high abrasion resistance and good bonding with treated surface.
- It forms a waterproof layer Protects the surface from stains and various other chemicals.
- Quick drying. The treated surface is air cured.
- Provides excellent resistance to water and dirt.
- Excellent weather ability. It can be used on exterior as well as interior surfaces.
- It is water- based,very low VOC. It is eco-friendly. Non-flammable. Non-toxic. Low odor
- Type : Emulsion of premium acrylic resins
- Color : Milky white (Dries clear)
- Specific Gravity : 1.07 +/- 0.02 at 25oC
- Solid content: approx. : 50% w/w +/- 0.02
CETEX AS is concentrated. It can be diluted 2 - 4 times with waterdepending on the application, porosity of surface and result required.Hence coverage of 1.0 kg ofconcentrated material will vary from 10 to 15 sq. meters per liter. However, fieldtrials should be conducted to determine the optimum dilution and coverage toachieve the required result.
DIRECTION OF USE
- All loose and damaged surfaces should be thoroughly rectified.
- Surface should be free from dust, grease, coatings like curing compounds, etc.
- Surface should be dried thoroughly before application.
- It is advised to apply in two steps.
- Final coat (after primer coat dries)- dilute with minimum 2-3 part of water for everyone parts of AS (ratio 1:3)
- In case of floor,light foot traffic can be started after 4 hours of drying of final coat.
- After application the surface can be buffed for improving the gloss.
- CETEX-AS is available in 50, 220 kg pack. Other sizes available on request.
- Store in frost-free condition, away fromsun light and extreme heat. For best result, use within one year.
LIMITED WARRANTY INFORMATION PLEASE READ CAREFULLY -The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, the results obtained may differ depending on usage or workmanship.
- JNPT Nava Shewa, India
- 60 Per Day
- 1 Days
- Free samples available with shipping and taxes paid by the buyer
- CETEX-Acrylic Sealer is available in 50, 220 kg pack.
- All India
- ISO 9001:2015
DBS House, Prescott Road, Fort., Mumbai, Maharashtra, 400001, India