Admixtures

CETEX- Super Plasticiser & Water Proofing is an economical super- plasticiser and also acts like an integral water proofing compound in mortar and concrete. It is used as plasticiser for production of free flowing concrete for slabs, foundations, walls, beams, columns; canals, tunnels, mortars, wherever water-proofing is required.

CETEX Super Plasticiser & Set Retarder (SPSR) when added in the cementitious mixture, improves workability of concrete mix for constant water to cement ratio and increases the setting time. It is idle for Ready Mix Concrete (RMC) plants. It is used as super plasticiser for production of free flowing concrete for slabs, foundations, walls, beams, columns and piers; areas with dense reinforcement. As a water reducing agent it is also used for early and ultimate high strength concrete such as pre-cast concrete, pre-stressed concrete, bridges, cantilever structure and foundations, etc. It complies with ASTM-C-494 Type D/G, IS- 9103 and BS-5075. It complies with ASTM-C-494 Type A/D, IS- 9103.

CETEX - Set Accelerator (SA) when added in the cementitious mixture, it decreases the set time of the mix. CETEX-SA is used in production of concrete where early set is required. It is ideal for sprayed or pumped concrete/mortar mix like in shotcrete / guniting and ready mix concrete. It is also suitable for concrete where high early strength is required or formwork has to be removed early, for example reinforced pre cast. It complies with ASTM-C-494 Type C, IS- 9103.

CIA(Corrosion Inhibiting Admixture), when added in the fresh concrete mix, inhibits the corrosion of embedded reinforcement steel and other metallic component. It complies with ASTM-G 109.

Nanosilica Based Hyperplasticiser (Pozzo-Cat) is a Pozzolanic Catalyst which catalyses the cement hydration process in concrete. Pozzo-Cat acts like a high grade plasticizer results in high strength and durability of concrete.

CETEX PSA - Plasticiser & Set Accelerator, helps in reducing the water cement ratio of the concrete mix, decreases the set time and results in higher overall strength.

CETEX SPWR increases the workability (plasticity) of the concrete mix for constant water to cement ratio. The same level of workability is achieved at reduced water cement ratio. It reduces the water bleeding. It is used as superplasticiser for production of free flowing concrete for slabs, foundations, walls, beams, columns and piers; areas with dense reinforcement, etc. As water reducing agent it is used for early and ultimate high strength concrete such as pre-cast concrete, pre-stressed concrete, bridges, cantilever structure and foundations, etc.

CETEX SA - PB (Set Accelerator for Pavers and Bricks) when added in the cementitious mixture, decreases the set time of the mix even during low ambient temperatures. CETEX-SA-PB is used in production of unreinforced concrete where early set is required. It can also be used in reinforced concrete where total chloride is below 1.0% of cementatious matter. It is also suitable for concrete where high early strength is required or formwork has to be removed early. It complies with ASTM-C-494 Type C, IS- 9103.