PP Construction Fiber

SPECIFICATION OF CETEX POLYPROPYLENE FIBRES:Material : Virgin Polypropylene (PP)Length : 6, 12, 24, 40, 55 mm Melt Point : 162°C Specific Gravity : 0.91 Ignition Point : 360°C Thermal Conductivity : Low Electrical Conductivity : Low Alkali Resistance : 100% Alkali Proof Acid & Salt Resistance: High Diameter (approx) : 24 - 44 micron Aspect ratio (approx) : 250 – 1250

CPP06 are polypropylene of 6 mm cut length. These micro fibers prevent crack formation and provide reinforcement. They are mainly used in plasters in finishing coat, for ornamental castings for crack prevention and as well as additional reinforcement. Suitable care has been taken to ensure dispersion of fibres during hand mixing of mortar.

CPP 12 are Polypropylene (PP) fibers of 12 mm length. These micro fibers prevent crack formation and provide reinforcement. They are mainly used in mortar where thickness of plaster is 10 mm or more. They are suitable for waterproofing or repair of structures. They are also used in concrete, where mixing is manual.

CPP 24 are Polypropylene (PP) synthetic fibers of 24mm length. These micro fibers are used in concrete mixing machines. They prevent crack formation and provide reinforcement. Maximum size of the aggregate in normal concrete is 19mm (approx.). Being longer than maximum size of aggregate, each and every strand of fiber is effective. CPP 24 is used to minimize damage of structures and prevent spalling, in case of fire.

CPP 50 are Polypropylene (PP) macro fibers of 48mm-50mm in length for reinforcement in concrete. The long length of the fiber holds different components of concrete together, thereby providing a better reinforcement thus increases the strength and properties of concrete. It has highest aspect ratio in industry. Due to fine diameter and long length, usage of this fiber results in very effective 3 dimensional network inside the concrete matrix. It is used in flooring, roads, slabs, shot-crete and other load bearing structures.

CETEX CPPST are graded (mixed length) Polypropylene (PP) synthetic fibers suitable for various concrete structural works. It is a blend of 24 to 50mm length fibers. Each fiber being longer than maximum size of aggregate, hence each and every strand of fiber is effectively reinforces. Due to long length, 48 - 50mm gives better anchorage and reinforcement while 24mm increases the number of fibers in a given dosage, preventing crack formation.

CPP 40 are Polypropylene (PP) macro fibers of 40 mm length for reinforcement in concrete. The long length of the fibre holds different components of concrete together, thereby providing a better reinforcement thus increases the strength and properties of concrete. It has been used in flooring, roads, slabs and other load bearing structures.