0
<-- nev left start -->

Graded Fiber

Graded Fiber
Graded Fiber
Price And Quantity
  • Kilograms/Kilograms
  • 20
  • Kilograms/Kilograms
  • 175.00 - 200.00 INR
    Product Specifications
    • Construction, Concrete, Beams, Slabs, Roads, Precast, Shot-crete, Dams, Floor
    • Concrete Fibers
    • Polypropylene
    • 24-50mm
    • Construction, Concrete, Beams, Slabs, Roads, Precast, Shot-crete, Dams, Floor
    Product Description

    POLYPROPYLENE (PP) CONSTRUCTION FIBERS - CPPST

     APPLICATION

    CETEX CPPST are graded (mixed length) Polypropylene(PP) synthetic fibers suitable for various concrete structural works. It is a blend of 24 to 50mm length fibers. Each fiber being longer than maximum size of aggregate, hence each and every strand of fiber is effectively reinforces. Due to long length, 48 - 50mm gives better anchorage and reinforcement while 24mm increases the number of fibers in a given dosage,preventing crack formation. It has been found that graded fibers give better result compared to individual length fibers. It is the most popular for concrete application. Suitable care has been taken to ensure dispersion of fibers. It conforms to ASTM C1116/C 1116M & BS EN 14889-2:2006.

    It is recommended for heavy load bearing structures like Industrial floor,road, high impact concrete, slabs, dams, etc.


    DOSAGE

    • For Crack Prevention- 600 gm/m3 (minimum); Recommended Dosage - 900 gm/m3
    • For Primary Reinforcement (in concrete floors / precast) - Above 1.0 - 6.0 kg/m3.

    Results improve with higher dosage of fiber. Kindly optimize the dosage depending on the requirement.


    HOW TO USE?

    • For Machine mixing- Small quantity of water is dosed in empty drum to clean the drum after each batch. Add fiber in the rotating drum. Then add the chips/sand/cement/water in the concrete mixer and continue normal operation.
    • For Dosing in Ready Mix Truck - Add fibers in small lots in the rotating drum. After dosing is complete allow extra 20-30 revolutions of the drum at maximum RPM.

    SPECIFICATION

    Material

    100% virgin Polypropylene (PP)

    Length

    24.0 - 50.0 mm

    Diameter

    28 - 40 micron

    Aspect Ratio

    860 - 1250

    Melt Point

    162OC

    Specific Gravity

    0.91

    Thermal & Electric Conductivity

    Low

    Alkali Resistance

    100% Alkali Proof

    Acid & Salt Resistance

    High


    Note:
    Addition of fibers to a given mix may appear to decrease the slump. The workability, however, will not be affected and additional water should not be added.

    Trade Information
    • JNPT Nava Shewa, India
    • 1000 Per Day
    • 3 Days
    • Yes
    • Free samples available with shipping and taxes paid by the buyer
    • Packaging as per client's requirement.
    • All India
    • ISO 9001: 2015
      Contact Us

      DBS House, Prescott Road, Fort., Mumbai, Maharashtra, 400001, India
      Phone :+918037744994