Water Repellent

CETEX Water Repellent (WR) is designed to impart water repellence to wide variety of surfaces. Supplied as concentrated liquid, it can be diluted up to 10 times or more before application. Within few hours of application,it reacts with carbon dioxide in the air to form water repellent surface.

TYPICAL PROPERTIES

• Total Solid Content  : 40% approx
• Specific Gravity at 25 : 1.30 +/- 0.02
• pH  : HighlyAlkaline
• VOC Content  : Negligible
  
  

APPLICATION METHODS

• Is to bediluted. (Users should test the concentration to be applied on the surfaceprior touse).The diluted solution is then applied on the clean surface by spraying or brushing.
  

 APPLICATION PROCEDURES

• Water Repellent shouldbe diluted with ordinary tap water before use. However, high mineralcontentwater should be avoided as it may cause precipitation.
• CETEX Water Repellent, greatcare should be taken to protect nearby vegetation or articles from over spray.The material is highly alkaline. It will damage or kill vegetation and willstain or etch glass, plastic, aluminum and most metals. If contact does occur,wash immediately with water.
• Swallowing large amounts may cause serious injury. Avoid contact with eyes, skin and clothing. In case of skin contact, wash immediately. In caseof eye contact, flush immediately with water for at least 15 minutes and obtain prompt medical attention.

PACKING

• CETEX Water Repellent isavailable in packs of 45kg or 260kg.
  
  

STORAGE

• Store in frost-free condition away from sunlight or extreme heat.For best result, use within one year.
• LIMITED WARRANTY INFORMATION PLEASE READCAREFULLY -The information contained herein is offered in good faith and is believed to beaccurate. However, because conditions and methods of use of our products are beyond our control, the results obtained may differ depending on usage or workmanship.